Skip to main content

GPON FTTH Cascade Splitter & Optical Tree Calculator

Calculate GPON/EPON optical link loss budget, simulate ODC/ODP cascade splitters (1:2 to 1:16, tap 15/85), and view ITU-T G.984 optical tree diagrams.

Input Parameters

Try Example:
dBm
112
km
0.125
km
0.115
m
10500
Titik
050
Pasang
230

Calculation Results

OLT SFP Launch Power
5.0 dBm
Total Fiber Distance
2.45 km
ODC Output Power
-3.08 dBm
ONT Received Optical Power (Rx)
-15.41 dBm
Total Optical Link Loss
20.41 dB
Max Subscribers per PON Port
32 ONTs
Optical Budget Verdict
LAYAK OPERASI (Sesuai Standar ITU-T G.984)
Want to compare 2 design options side-by-side (e.g., Scenario A vs Scenario B)?
⚡ Enterprise Network Infrastructure Standard
Managed L2+/L3 Gigabit Switch (802.1Q VLAN & RSTP) + Cat6/FO Uplink
RFC 1918 / RFC 4632 Compliant Addressing

Isolate management, server, user, and IoT/CCTV traffic into dedicated 802.1Q VLANs.

Cascading ODP Loss Schedule Table
ODP StageSplitter ConfigurationCumulative LossONT Rx Signal PowerLink Health Status
Tiang ODP-1ODC 1:4 ➔ ODP 1:820.41 dB-15.41 dBmOPTIMAL (Hijau — Sinyal ONT Stabil)
Tiang ODP-2ODC 1:4 ➔ ODP 1:822.26 dB-17.26 dBmOPTIMAL (Hijau — Sinyal ONT Stabil)
Tiang ODP-3ODC 1:4 ➔ ODP 1:824.11 dB-19.11 dBmOPTIMAL (Hijau — Sinyal ONT Stabil)
Tiang ODP-4ODC 1:4 ➔ ODP 1:825.96 dB-20.96 dBmOPTIMAL (Hijau — Sinyal ONT Stabil)
FTTH Optical TreeITU-T G.984 GPON Class C+ / C++

OLT ➔ ODC ➔ ODP Optical Splitter Cascade Tree Diagram

Kabel Feeder (1.5 km)Tx: 5.0 dBmGPOLT GPONCentral POPSFP: C_PLUSP_out: 5.0 dBmODODC CabinetPLC 1:4Loss: 7.2 dBP_out: -3.08 dBmKapasitas: 32 ONTTiang ODP-1ODC 1:4 ➔ ODP 1:8Loss: 20.41 dBONT PelangganRx: -15.41 dBm● STABIL ITU-TTiang ODP-2ODC 1:4 ➔ ODP 1:8Loss: 22.26 dBONT PelangganRx: -17.26 dBm● STABIL ITU-TTiang ODP-3ODC 1:4 ➔ ODP 1:8Loss: 24.11 dBONT PelangganRx: -19.11 dBm● STABIL ITU-TTiang ODP-4ODC 1:4 ➔ ODP 1:8Loss: 25.96 dBONT PelangganRx: -20.96 dBm● STABIL ITU-TVerdict: LAYAK OPERASI (Sesuai Standar ITU-T G.984)Standar Sinyal Rekomendasi: -8 dBm s/d -23 dBm (Sensitivitas ONT Max -27 dBm)kalkunet.com
Share to WhatsApp
ℹ️

Technical Accuracy Note: Calculation results are engineering estimates based on standard RFC/IEEE/ITU-T models. Actual field performance may vary due to protocol overhead, hardware specifications, and environmental factors.

🚀 Share Calculation Results or Embed on Your Site

Deep-link automatically preserves your current inputs — ideal for WhatsApp, Telegram, Reddit, or engineering docs.

How to Use This Tool

  1. Select your OLT SFP transceiver class (B+, C+, or C++) and specify feeder, distribution, and drop cable lengths.
  2. Choose primary ODC splitter ratios (1:2, 1:4, 1:8), secondary ODP ratios (1:4, 1:8, 1:16), and optional FBT unbalanced tap ratios for cascading poles.
  3. Review the multi-stage ODP cascade table, verify that optical Rx power remains within optimal green thresholds (-8 to -23 dBm), and export the optical tree diagram.

Worked Example: Standard FTTH (ODC 1:4 + ODP 1:8)

Computed example: An OLT SFP Class C+ (+5.0 dBm) with 1:4 ODC and 1:8 ODP over 2.45 km total fiber delivers -18.5 dBm at the ONT, verified as OPTIMAL (Green) under ITU-T G.984 standards.

Example Input
OLT PON SFP Class
Class C+ (+5.0 dBm Typ)
Measured OLT Tx Power (dBm)
5 dBm
Feeder Fiber Length OLT to ODC (km)
1.5 km
Distribution Fiber Length ODC to ODP (km)
0.8 km
Drop Cable Length ODP to ONT (m)
150 m
1st Stage ODC Splitter Ratio
PLC 1:4 (Loss ~7.2 dB)
2nd Stage ODP Splitter Ratio
PLC 1:8 (Loss ~10.5 dB)
FBT Unbalanced Tap Ratio
No Cascade Tap (Pure Star Topology)
Splice Joint Points Count
6 Splices
SC/APC Connector Pairs
6 Pcs
Calculated Output
OLT SFP Launch Power
5.0 dBm
Total Fiber Distance
2.45 km
ODC Output Power
-3.08 dBm
ONT Received Optical Power (Rx)
-15.41 dBm
Total Optical Link Loss
20.41 dB
Max Subscribers per PON Port
32 ONTs
Optical Budget Verdict
LAYAK OPERASI (Sesuai Standar ITU-T G.984)
Cascading ODP Loss Schedule Table
ODP StageSplitter ConfigurationCumulative LossONT Rx Signal PowerLink Health Status
Tiang ODP-1ODC 1:4 ➔ ODP 1:820.41 dB-15.41 dBmOPTIMAL (Hijau — Sinyal ONT Stabil)
Tiang ODP-2ODC 1:4 ➔ ODP 1:822.26 dB-17.26 dBmOPTIMAL (Hijau — Sinyal ONT Stabil)
Tiang ODP-3ODC 1:4 ➔ ODP 1:824.11 dB-19.11 dBmOPTIMAL (Hijau — Sinyal ONT Stabil)
Tiang ODP-4ODC 1:4 ➔ ODP 1:825.96 dB-20.96 dBmOPTIMAL (Hijau — Sinyal ONT Stabil)

Core Concept & Engineering Notes

Designing modern Gigabit Passive Optical Network (GPON) and EPON Fiber to the Home (FTTH) access infrastructure relies on hierarchical passive optical splitters distributed across outdoor physical topologies. Optical transmission originates at the Optical Line Terminal (OLT) within the central Point of Presence (POP), travels through heavy feeder trunk cables to the Optical Distribution Cabinet (ODC) for first-stage division, traverses distribution routes to pole-mounted Optical Distribution Points (ODPs), and finally extends via drop cables into subscriber Optical Network Terminals (ONTs). Computing link power budgets represents the foremost prerequisite for carrier-grade network viability. International telecommunications standard ITU-T G.984.2 defines standard OLT SFP transmitter launch outputs—Class B+ (+3 dBm), Class C+ (+5 dBm), and Class C++ (+7 dBm)—alongside strict receiver sensitivity operating limits between -8 dBm and -27 dBm at subscriber ONTs. SFP optical power received stronger than -8 dBm risks saturating or destroying photodiode optical receivers. Conversely, optical attenuation dropping below -26 dBm triggers Loss of Signal (LOS) alarms, severe frame loss, and unstable broadband connectivity. In rural and street-run deployments, network engineers frequently implement cascading bus topologies pairing unbalanced Fused Biconical Taper (FBT) ratio couplers (15/85, 20/80, 30/70, or 50/50) with balanced Planar Lightwave Circuit (PLC) splitters (1:4, 1:8, or 1:16). This simulator models cumulative insertion losses across multi-stage cascading poles (ODP-1 through ODP-4), factoring downstream 1490nm fiber attenuation (0.25 dB/km), upstream 1310nm loss (0.35 dB/km), fusion splice margins (0.1 dB/splice), and SC/APC connector pairs (0.25 dB/connector) to ensure every customer ONT operates within verified ITU-T safety tolerances.

How It Was Calculated (Formulas & Steps)

Frequently Asked Questions (FAQ)

What is the acceptable optical power receive threshold for GPON ONTs?

The optimal received optical power at the subscriber ONT is between -8 dBm and -23 dBm. SFP signals stronger than -8 dBm require attenuators, while levels below -26 dBm trigger LOS disconnects.

When should unbalanced FBT ratio splitters be deployed instead of PLC?

Unbalanced FBT splitters are ideal for linear street-run cascade topologies where a single fiber core feeds successive poles with low through-loss (e.g. 20/80 or 15/85), avoiding redundant long-distance feeder cables.

What is the maximum number of subscriber ONTs supported on a single OLT PON port?

ITU-T G.984 GPON standards support physical split ratios up to 1:64 or 1:128 per PON port. However, for optical loss margin and per-user bandwidth guarantees, 1:32 (1:4 ODC to 1:8 ODP) is the carrier standard.

Why is optical attenuation higher at 1310nm compared to 1490nm?

The 1310nm wavelength serves upstream transmission (ONT to OLT) and experiences ~0.35 dB/km intrinsic loss due to Rayleigh scattering in silica glass, whereas downstream 1490nm experiences only ~0.25 dB/km.

Related Calculators

View All Network & Routing Tools →
Fiber Optic Loss Budget (dBm) & UTP Cable Box Calculator

Calculate GPON/EPON optical link loss budget (dBm), passive splitter loss, splicing, and estimate bulk UTP Ethernet cable boxes and RJ45s.

TIA-598C Fiber Color Code & RJ45 Pinout Simulator

Visualizer for TIA-598C fiber optic color codes from 1 to 288 cores, tube mapping, and RJ45 LAN pinout diagrams (T568A/T568B) with PoE pairing.

dBm to mW Converter & Free Space Path Loss (FSPL) Calculator

Convert RF power between dBm, milliwatts (mW), Watts, and dBW, and calculate Free Space Path Loss (FSPL) attenuation for wireless radio links.

Wi-Fi Access Point & PoE Switch Capacity Calculator

Calculate Wi-Fi access point counts by coverage area and client capacity, PoE switch power budget, and minimum ISP internet line bandwidth.

Complete Network & Routing Directory →

References & Notes

Last updated: Technically Verified · Industry Standard
  • ITU-T G.984.2 — Gigabit-capable passive optical networks (GPON): Physical Media Dependent (PMD) layer specification
  • IEC 61753-1 — Fibre optic interconnecting devices and passive components performance standard

Note: Results above are mathematical estimates based on standard formulas. Always verify against official vendor documentation and site conditions before production deployment.

🔗Related Scenarios & Companion Calculators

Browse All 30+ Scenarios →

⚡ Ready-to-Use Scenario Presets:

/32 = Mask 255.255.255.255 • 1 Usable Hosts→
/32 Subnet Mask (255.255.255.255): Usable Hosts (1), Wildcard & IPv4 Range

Instant /32 CIDR reference: Subnet Mask is 255.255.255.255, Wildcard 0.0.0.0, Total IPs 1, and 1 Usable Hosts. Ideal for OSPF/BGP Router Loopback & Single Host Route.

/30 = Mask 255.255.255.252 • 2 Usable Hosts→
/30 Subnet Mask (255.255.255.252): Usable Hosts (2), Wildcard & IPv4 Range

Instant /30 CIDR reference: Subnet Mask is 255.255.255.252, Wildcard 0.0.0.3, Total IPs 4, and 2 Usable Hosts. Ideal for Point-to-Point Inter-Router WAN Link (2 Usable IPs).

/29 = Mask 255.255.255.248 • 6 Usable Hosts→
/29 Subnet Mask (255.255.255.248): Usable Hosts (6), Wildcard & IPv4 Range

Instant /29 CIDR reference: Subnet Mask is 255.255.255.248, Wildcard 0.0.0.7, Total IPs 8, and 6 Usable Hosts. Ideal for DMZ Public Server Sub-Block & BGP Peering (6 Hosts).

🛠️ Sibling Calculators in this Category:

IPv4 Subnet and CIDR Calculator

Calculate IPv4 network address, broadcast, usable host range, netmask, wildcard, binary mask, and RFC address type (RFC 1918, /31, CGNAT).

IPv4 Subnet Split and VLSM Planner

Split an IPv4 network into N equal subnets or allocate boundary-aligned VLSM blocks by required host count with CSV and Markdown export.

IPv6 Subnet Calculator and Prefix Planner (/48, /56, /64)

Expand and compress IPv6 addresses per RFC 5952, calculate network prefix boundaries, /64 SLAAC subnet counts, and child prefix blocks.

MikroTik Bandwidth Calculator (Simple Queue, Burst, PCQ, FQ-CoDel)

Calculate Limit-At (CIR), Max-Limit (MIR), Burst, PCQ, and FQ-CoDel for RouterOS v7 with automated configuration script generation.

🔬 Scientific Methodology & Normative Verification

Engineering Sensitivity Analysis, Response Curve & Technical Citation

✓ Calibrated to ISO/IEC/IEEE/TIA Clauses

1. 1. 3-Point Engineering Sensitivity & Tolerance Envelope

Comparative evaluation across theoretical laboratory bounds (0% loss), current nominal operating point, and conservative field safety bounds (±15% thermal/aging derating).

Evaluated Parameter Ideal Theoretical Bound Nominal Operating Point Conservative Safety Bound (±15%) Engineering Derating Rule
OLT SFP Launch Power 4.5 dBm 5 dBm 5.75 dBm Engineering Safety Margin (+15% Overhead)
Total Fiber Distance 2.21 2.45 2.82 Engineering Safety Margin (+15% Overhead)
ODC Output Power -2.77 dBm -3.08 dBm -3.54 dBm Engineering Safety Margin (+15% Overhead)
ONT Received Optical Power (Rx) -16.64 dBm -15.41 dBm -13.1 dBm Thermal & Aging Derating (-15% Worst-Case)
Total Optical Link Loss 18.37 dB 20.41 dB 23.47 dB Engineering Safety Margin (+15% Overhead)

2. 2. Mathematical Function Curve & Operating Coordinate (x₀, y₀)

MATHEMATICAL RESPONSE CURVE: TOTAL FIBER DISTANCE VS OLT TX POWER DBM Conservative Engineering Bound (+15% Safety Margin) 2 3 4 5 6 7 8 (x₀=5, y₀=2.45) Variabel Independen (x): Olt Tx Power dBm

3. 3. Physical Constants & Normative Standard Clauses

R_loop(Cat6, 20°C) = 14 Ω/100m ANSI/TIA-568.2-D & IEEE 802.3bt

DC Loop Resistance for 23 AWG Solid Copper Cat6

Clause 6.4.1 / Table 145-1 — Nominal 23 AWG solid copper loop resistance at 20°C is 14.0 Ω/100m (TIA maximum ceiling is 18.8 Ω/100m).

α_opt(1490nm) = 0.25 dB/km ITU-T Rec. G.652.D & G.984.2

Single-Mode Optical Fiber Attenuation Coefficient at 1490 nm

Table 1 / Class B+ & C+ Optical Path — Typical G.652.D attenuation at 1490 nm downstream is 0.22–0.25 dB/km (1310 nm upstream: 0.35 dB/km).

α_Cu(20°C) = 0.00393 °C⁻¹ IEC 60028

Temperature Coefficient of Resistance for Copper

International Annealed Copper Standard — Used in thermal derating equation: R(T) = R_20 × [1 + 0.00393 × (T - 20)].

4. 4. Independent Technical & Academic Citation (IEEE / APA 7th / BibTeX / LaTeX)

Use the standard citation formats below to reference this computational methodology in engineering specifications, audit reports, or academic papers.

Format IEEE & APA 7th Edition

[IEEE] KalkuNet Engineering Team, "GPON FTTH Cascade Splitter & Optical Tree Calculator — Standard Engineering Computational Instrument," KalkuNet Technical Suite, 2026. [Online]. Available: https://kalkunet.com/en/tools/gpon-ftth-splitter-cascade-calculator. [Accessed: 2026-11-08].

[APA 7th] KalkuNet Engineering Team. (2026). GPON FTTH Cascade Splitter & Optical Tree Calculator (Production release 2026-11-08) [Engineering computational software]. KalkuNet. https://kalkunet.com/en/tools/gpon-ftth-splitter-cascade-calculator

BibTeX & LaTeX Derivation Snippet
@software{kalkunet_gpon_ftth_splitter_cascade_calculator_2026,
  author = {{KalkuNet Engineering Team}},
  title = {{GPON FTTH Cascade Splitter & Optical Tree Calculator --- KalkuNet Engineering Suite}},
  year = {2026},
  publisher = {KalkuNet.com},
  url = {https://kalkunet.com/en/tools/gpon-ftth-splitter-cascade-calculator},
  urldate = {2026-11-08}
}

% LaTeX Engineering Derivation — Generated via https://kalkunet.com/en/tools/gpon-ftth-splitter-cascade-calculator
\begin{equation}
  \text{Model: } Total Link Loss (dB) = (Fiber Distance km × 0.25 dB/km) + (Splices × 0.1 dB) + (Connectors × 0.25 dB) + Loss ODC + Loss ODP + FBT Tap
\end{equation}
% Parameter Input Terukur: oltSfpClass = C_PLUS, \; oltTxPowerDbm = 5, \; feederLengthKm = 1.5, \; distributionLengthKm = 0.8
% Hasil Evaluasi Numerik : oltLaunchPowerDbm = \mathbf{5.0 dBm}, \; totalFiberDistanceKm = \mathbf{2.45}, \; odcOutPowerDbm = \mathbf{-3.08 dBm}